Wan 3.0 · Seedance 2.5

Wan 3.0 vs Seedance 2.5: Which One for Which Shot

Alibaba's Wan 3.0 is live on Creaa.ai alongside Seedance 2.5, and for once the comparison isn't lopsided — they lead on different axes. Wan 3.0 runs at 30 fps, renders 1080p for far fewer credits and takes audio as an input; Seedance 2.5 takes far more reference images and edits existing footage. Both are now on the unlimited plans, with different limits. Everything below is what these models do on Creaa.ai specifically, not what the vendors' own apps may offer.

Update · Nov 7, 2026

Wan 3.0 Unlimited is live — 720P clips of 3 to 15 seconds, on the $499, $599 and $999 Ultra plans. This comparison has been updated to match. What Wan 3.0 Unlimited includes

The short version

  • Both reach 1080p, but Wan 3.0 runs at 30 fps against 24 — and its 1080p costs 35 credits/s against Seedance 2.5's 92
  • Seedance 2.5 takes 50 reference images against Wan 3.0's 10 — the widest gap on the sheet
  • Wan 3.0 takes 5 reference audio clips and 5 reference videos, against 3 and 3; audio generation is on by default
  • Both are on the unlimited plans now, with different limits. Wan 3.0 covers 720P at 3–15s on the $499, $599 and $999 Ultra plans; anything else is billed per second — 23 / 35 credits at 720P / 1080P
  • Seedance 2.5 can edit existing footage (smart edit); Wan 3.0 is generation-only
  • Rule of thumb: Wan 3.0 for the finished 1080p deliverable or anything audio-led; Seedance 2.5 for character consistency and editing. For volume at 720P, either works on the $499 plan and up

Spec-by-spec

 Wan 3.0Seedance 2.5
Max resolution 1080P (720P / 1080P) 1080p (720p / 1080p)
Frame rate 30 fps 24 fps
Clip length 2–30 seconds 4–30 seconds
Reference images 10 50
Reference videos 5 3
Reference audio 5 3
Native audio Yes, on by default Yes
Edit existing footage No Yes — smart edit
First / first-last frame Both Both
Aspect ratios 16:9, 4:3, 1:1, 3:4, 9:16 Adds 21:9
Prompt length 20,000 characters 5,000 characters
Billing 23 / 35 credits/s at 720P / 1080P — or unlimited on $499, $599 and $999 Ultra (720P, 3–15s) 46 / 92 credits/s at 720p / 1080p — or unlimited on plan

Figures are the options exposed on Creaa.ai as of October 2026, not the vendors' maximum published capabilities. Both models are updated frequently; the generator always shows the current limits.

Where Wan 3.0 pulls ahead

1080p at 30 fps, for well under half the credits. Both models render 1080p on Creaa.ai, but Wan 3.0 does it at 35 credits per second against Seedance 2.5's 92, and at 30 fps rather than 24. For anything that ends up on a large screen — a landing page hero, a paid ad, a client deliverable — Wan 3.0 is the cheaper way to a 1080p file. The 30 fps also matters more than it sounds: motion-heavy footage at 24 fps needs interpolation to sit comfortably next to 30 fps camera footage in an edit.

One caveat worth stating plainly, because it cuts against the model on this page: if resolution is all you are after, MiniMax H3 goes to 2K and is covered by the unlimited plans — higher than either model's 1080p, and you would not pay per second for it. Wan 3.0's case is the combination of 1080p, 30 fps and audio input, not resolution on its own.

Audio as an input, not just an output. Both models generate native audio, but Wan 3.0 accepts up to five reference audio clips and has audio generation on by default. If your workflow starts from a voice track, a music bed or a specific sound design and you want the picture to follow it, that is the single clearest reason to pick Wan 3.0.

Two-second minimum and a 20,000-character prompt. Wan 3.0 will generate clips as short as two seconds, which makes it usable for loops, stingers and transitions that Seedance 2.5's four-second floor rounds up. And the prompt window is four times larger, which is real headroom if you write long structured shot descriptions rather than a sentence.

Where Seedance 2.5 pulls ahead

Fifty reference images against ten. This is the widest gap on the sheet and the one most likely to decide the question. If you are holding a character, a product or a set consistent across a sequence, reference count is the lever that does it. Ten is enough for a single subject from a few angles; fifty is enough for a cast.

It can edit, not just generate. Seedance 2.5 supports smart edit, so you can feed it existing footage and change it. Wan 3.0's reference video input is for conditioning a new generation, which is a different job. If the task is "fix this shot" rather than "make this shot", Wan 3.0 isn't the tool.

21:9. A small thing that matters if you are cutting cinematic aspect — Seedance 2.5 offers it and Wan 3.0 does not.

The cost picture — and the unlimited asterisk

This is the part worth reading carefully, because it usually outweighs the specifications.

ClipWan 3.0Seedance 2.5
5s @ 720P115 credits230 credits
5s @ 1080P175 credits460 credits
30s @ 720P690 credits1,380 credits
30s @ 1080P1,050 credits2,760 credits

Per clip, Wan 3.0 costs half or less at matched resolution. But that table only tells the whole story if you are paying per clip.

The asterisk: Creaa.ai's unlimited plans cover Seedance 2, Seedance 2.5 and MiniMax H3, and now Wan 3.0 Unlimited for 720P clips of 3 to 15 seconds on the $499, $599 and $999 Ultra plans. On those plans, neither per-second rate applies to a covered 720P clip. Wan 3.0's rates still apply to 1080P, clips outside 3–15 seconds, and the $299 plan, where Seedance 2.5 is unlimited and Wan 3.0 is not. Note that H3 on the unlimited plans runs up to 2K, so the unlimited route is not the low-resolution route. We would rather put that in a callout than let you discover it on an invoice.

How to choose

If you need…UseWhy
A 1080p finished deliverableWan 3.0Both reach 1080p; Wan 3.0 costs 35 credits/s against 92 — though H3 reaches 2K on the unlimited plans
Footage that cuts with 30 fps materialWan 3.0Native 30 fps, no interpolation step
Picture driven by an audio trackWan 3.0Up to 5 reference audio clips, audio on by default
A short loop or transition (2–3s)Wan 3.0Seedance 2.5 starts at 4 seconds
A consistent cast across shotsSeedance 2.550 reference images against 10
To change footage you already haveSeedance 2.5Smart edit; Wan 3.0 is generation-only
21:9 cinematic framingSeedance 2.5Wan 3.0 does not offer it
To generate at volumeEitherBoth are unlimited at 720P on the $499 plan and up (Wan 3.0 at 3–15s). On the $299 plan, or for unlimited clips over 15 seconds, use Seedance 2.5

The honest summary: Wan 3.0 is the better finishing model, Seedance 2.5 is the better working model. Wan 3.0 gives you the higher-fidelity file and the audio-led workflow; Seedance 2.5 gives you consistency across a sequence, the ability to revise, and a cost structure that does not punish iteration. Plenty of projects use both — block out the sequence on Seedance 2.5, render the hero shot on Wan 3.0.

FAQ

Wan 3.0 or Seedance 2.5 — which should I use?

Wan 3.0 when the output needs 30 fps, 1080p at a lower credit cost, or is built around audio you supply. Seedance 2.5 when you need many reference images, need to edit existing footage, or want unlimited clips on the $299 plan or longer than 15 seconds. They are genuinely complementary rather than one replacing the other.

Is Wan 3.0 included in the unlimited plan?

Yes — Wan 3.0 Unlimited is live, covering 720P clips of 3 to 15 seconds on the $499, $599 and $999 Ultra plans. 1080P, clips outside 3–15 seconds, and other plans are billed by credits per second — 23 at 720P and 35 at 1080P. The unlimited plans also cover Seedance 2, Seedance 2.5 and MiniMax H3 (up to 2K).

What does a Wan 3.0 clip actually cost?

Rate multiplied by seconds. Five seconds is 115 / 175 credits at 720P / 1080P; thirty seconds at 1080P — the longest it generates — is 1,050 credits. Seedance 2.5 is 46 / 92 credits per second at 720p / 1080p, so five seconds is 230 credits at 720p.

Does Wan 3.0 generate sound?

Yes, natively and on by default. It also accepts up to five audio clips as input references, against Seedance 2.5's three — the reason to reach for it on anything audio-led.

How does Wan 3.0 compare to Wan 2.6?

Wan 2.6 remains available on Creaa.ai. Wan 3.0 is the newer model in the same family and is the one to reach for on new work; 2.6 is kept for continuity on projects already built around it.

Can I use both in one project?

Yes, and it is often the right call — iterate on Seedance 2.5 where generation is covered by your plan, then render the shots that ship on Wan 3.0 at 1080p.

Keep reading

Specifications, credit rates and plan coverage describe Creaa.ai as of November 7, 2026 and are subject to change — the generator and the pricing page are authoritative. Vendors may publish higher maximums for these models than the options exposed here. Creaa.ai has no affiliation with Alibaba or ByteDance; we provide access to both models and describe each as accurately as we can, including where one outperforms the other.